Table of Contents
Advertisement
Chapter 3 Basic Operations — Switching on/off the projector
When the brightness limitation setting screen is displayed
When the [BRIGHTNESS LIMITATION] was set to [ON] in the [BRIGHTNESS LIMITATION SETTING] screen
of the initial setting or when the [SECURITY] menu → [BRIGHTNESS LIMITATION] was set to [ON] while the
projector was used previously, the [BRIGHTNESS LIMITATION SETTING] screen is displayed after projection
starts. Change the setting as necessary.
1)
Enter a security password and press the <执行> button.
f The [BRIGHTNESS LIMITATION SETTING] screen is displayed.
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
3)
Press the <菜单> button.
f The setting is reflected.
Note
f The security password is the password set in the [SECURITY] menu → [SECURITY PASSWORD CHANGE].
BRIGHTNESS LIMITATION SETTING
Please enter the security password.
When incorrect security password is entered, the
brightness will be limited.
INPUT
SET
执行
BRIGHTNESS LIMITATION SETTING
BRIGHTNESS LIMITATION
CHANGE
Select this item when the projector is used with the brightness limited. In such case, upper limit for
the brightness of the light source will be limited to approximately 33 % (equivalent to the brightness
approximately 10 000 lm) regardless of the [LIGHT OUTPUT] setting.
Select this item when the projector is used with the brightness limitation disabled.
INPUT
0 〜 9
ON
ENGLISH - 73
Advertisement
Table of Contents
