Panasonic PT-SRZ34KC Operating Instructions Manual page 194

[RS-232C]
Set the communication conditions of the <串口输入>/<串口输出> terminals. For details on the connection method
for RS-232C communication, refer to "<串口输入>/<串口输出> terminal" (x page 297).
Setting the communication condition of the <串口输入> terminal
1) Press as to select [RS-232C].
2) Press the <执行> button.
f The [RS-232C] screen is displayed.
3) Press as to select [INPUT SELECT].
4) Press qw to switch the item.
[PROJECTOR]
[DIGITAL LINK]
5) Press as to select [(IN) BAUDRATE].
6) Press qw to switch the item.
f The items will switch each time you press the button.
[9600]
[19200]
[38400]
7) Press as to select [(IN) PARITY].
8) Press qw to switch the item.
f The items will switch each time you press the button.
[NONE]
[EVEN]
[ODD]
Setting the communication condition of the <串口输出> terminal
1) Press as to select [RS-232C].
2) Press the <执行> button.
f The [RS-232C] screen is displayed.
3) Press as to select [(OUT) BAUDRATE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[9600]
[19200]
[38400]
5) Press as to select [(OUT) PARITY].
6) Press qw to switch the item.
f The items will switch each time you press the button.
[NONE]
[EVEN]
[ODD]
194 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Performs the RS-232C communication with the <串口输入> terminal of the projector.
Performs the RS-232C communication via the optional DIGITAL LINK output supported device (Model
No.: ET-YFB100C) and the <DIGITAL LINK> terminal.
Select the proper speed.
Select the parity condition.
Select the proper speed.
Select the parity condition.