Table of Contents
Advertisement
rViewing 3D images
The projector can display the 3D video signal input in various formats such as "frame packing", "side by side", etc.
You are required to prepare external devices for viewing 3D images (such as 3D eyewear, video signal output
devices) which are suitable for your 3D system. Connections of the projector and external devices vary depends
on the 3D system to be used, see the operating instructions of external devices you use.
Refer to "List of 3D compatible signals" (x page 316) for the types of 3D video signals that can be used with the
projector.
Accessories
Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the
number of accessories.
Wireless/wired remote control unit <1>
(N2QAYB001177)
Power cord <1>
(K2CZ3YY00094)
Attention
f After unpacking the projector, discard the power cord cap and packaging material properly.
f Do not use the supplied power cord for devices other than this projector.
f For missing accessories, consult your dealer.
f Store small parts in an appropriate manner, and keep them away from small children.
Note
f The model numbers of accessories are subject to change without prior notice.
24 - ENGLISH
Chapter 1 Preparation — Precautions for use
Lens hole cover <1>
(1GE1RZ21K)
(Attached to the product at the time of purchase)
AA/R6 or AA/LR6 battery <2>
(For remote control unit)
Lens fixing screw <1>
(XYN4+J18FJ)
Advertisement
Table of Contents
