Table of Contents
Advertisement
[AUTO]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
Setting [AUTO GAMMA SELECT] in [SLOT 输入] (DisplayPort input)
Set this item when the gamma mode is to be automatically set based on the InfoFrame information added to the
video signal.
1)
Press as to select [SLOT 输入].
2)
Press the <执行> button.
f The [SLOT 输入] screen is displayed.
3)
Press as to select [DisplayPort1] or [DisplayPort2], and press the <执行> button.
f The [DisplayPort1] screen or the [DisplayPort2] screen is displayed.
4)
Press as to select [AUTO GAMMA SELECT].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
[DISABLE]
Note
f Even if [AUTO GAMMA SELECT] is set to [ENABLE], when the information required for the HDR (High Dynamic Range) support is not
included in the InfoFrame information added to the displayed video signal, the gamma mode is not automatically set and follows the setting
in the [PICTURE] menu → [GAMMA].
Setting [AUTO COLOR SPACE SELECT] in [SLOT 输入] (DisplayPort input)
Set this item when the color space is to be automatically set based on the InfoFrame information added to the
video signal.
1)
Press as to select [SLOT 输入].
2)
Press the <执行> button.
f The [SLOT 输入] screen is displayed.
3)
Press as to select [DisplayPort1] or [DisplayPort2], and press the <执行> button.
f The [DisplayPort1] screen or the [DisplayPort2] screen is displayed.
4)
Press as to select [AUTO COLOR SPACE SELECT].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
[DISABLE]
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically sets the signal level.
Select this item when the signal output from the HDMI terminal of the external device (such as a
Blu-ray disc player) is input to the <DisplayPort 输入 1> terminal or the <DisplayPort 输入 2> terminal
using a conversion cable, etc.
Select this item when the signal output from the DisplayPort terminal of the external device (such as a
computer) is input to the <DisplayPort 输入 1> terminal or the <DisplayPort 输入 2> terminal.
Select this item also when the signal output from the HDMI terminal of a computer, etc., is input to the
<DisplayPort 输入 1> terminal or the <DisplayPort 输入 2> terminal using a conversion cable, etc.
Select this item when the gamma mode is to be automatically set to the one compatible with
HDR (High Dynamic Range) based on the InfoFrame information added to the video signal. In such
case, the [PICTURE] menu → [GAMMA] is set to [HDR ST2084-500], [HDR ST2084-1000], or
[HDR HLG].
Select this item when the gamma mode is not to be automatically set and to specify the gamma mode
with the [PICTURE] menu → [GAMMA].
Select this item when the color space is to be automatically set to the one compatible with HDR (High
Dynamic Range) based on the InfoFrame information added to the video signal. In such case, the
[PICTURE] menu → [COLOR SPACE] is set to [ITU-2020 emu.].
Select this item when the color space is not to be automatically set and to specify the color space with
the [PICTURE] menu → [COLOR SPACE].
ENGLISH - 149
Advertisement
Table of Contents
