Table of Contents
Advertisement
Chapter 3 Basic Operations — Switching on/off the projector
Initial setting (time zone)
Set [TIME ZONE] in accordance with the country or region where you use the projector.
After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [DATE
AND TIME]. The current settings are displayed in [LOCAL DATE] and [LOCAL TIME].
1)
Press qw to switch the setting.
2)
Press the <ENTER> button to proceed to the initial setting.
Note
f In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korea Standard Time). Change the setting of the
[PROJECTOR SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.
Initial setting (date and time)
Set the local date and time.
After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [DATE
AND TIME].
To set the date and time automatically, refer to "Setting the date and time automatically" (x page 174).
1)
Press as to select an item.
2)
Press qw to switch the setting.
3)
Press the <ENTER> button.
f Confirm the setting value and complete the initial setting.
When the administrator account setting screen is displayed
When the projector is switched on for the first time after purchase, or when the [PROJECTOR SETUP] menu →
[INITIALIZE] → [FACTORY RESET] is executed, the focus adjustment screen, the [INITIAL SETTING] screen,
and then the [ADMINISTRATOR ACCOUNT] screen is displayed in order after the projection starts. If the
[PROJECTOR SETUP] menu → [INITIALIZE] → [NETWORK/E-MAIL ONLY] is executed, the [ADMINISTRATOR
ACCOUNT] screen is displayed after the projection starts.
When using the network function of the projector, set a user name and password of the administrator account. It
can be set later in the [NETWORK] menu → [ADMINISTRATOR ACCOUNT].
76 - ENGLISH
INITIAL SETTING
+09:00
TIME ZONE
LOCAL DATE
20XX/01/01
LOCAL TIME
12：34：56
Please set up a time zone according to the area of your
country or region.
CHANGE
SET
ENTER
INITIAL SETTING
20XX
YEAR
MONTH
1
DAY
1
HOUR
12
34
MINUTE
56
SECOND
Please set the date and time
of the built-in clock of the projector.
MENU SELECT
CHANGE
SET
ENTER
6/7
7/7
Advertisement
Table of Contents
