Table of Contents
Advertisement
r Control panel
1
Power standby <v> button
Sets the projector to the state where the projector is turned off
(standby mode) when the <主电源> switch on the projector is
set to <开> and in projection mode.
2
Power on <b> button
Sets the projector to projection mode when the <主电源> switch
on the projector is set to <开> and the power is turned off
(standby mode).
3
Input selection buttons (<HDMI>, <DVI-D>, <SDI>, <DIGITAL
LINK>, <SLOT>)
Switches the input signal to project. (x page 77)
<SLOT> button can be used when the optional Interface Board
is installed in the slot on the projector.
4
Input selection terminal indicator
Indicator that shows the selected input terminal. This indicator
lights up when a video signal is being input to the selected
terminal, and blinks when there is no video signal being input.
5
<INPUT MENU> button
Displays the input selection screen. (x page 79)
6
<灯> switch
This is a light switch for the connecting terminals and control
panel.
Chapter 1 Preparation — About your projector
1
2
3
4
5
6
7
8
9
10
11
12
13
14
7
Information monitor
Displays various statuses and error information. (x page 256)
8
<INFO> button
Used to operate the information monitor. (x page 256)
9
<菜单> button
Displays or hides the main menu. (x page 96)
Returns to the previous menu when a sub-menu is displayed.
10 <镜头> button
Adjusts the focus, zoom, and lens shift.
11 <执行> button
Determines and executes an item in the menu screen.
12 <快门> button
Used to temporarily turn off the image. (x page 91)
13 asqw buttons
Used to select items in the menu screen, change settings, and
adjust levels.
Also used to enter a password in [SECURITY] or enter
characters.
14 <屏幕显示> button
Switches the on-screen display function on (display) or off
(hide). (x page 91)
ENGLISH - 29
Advertisement
Table of Contents
