Table of Contents
Advertisement
3)
Press as to select [EXTRON XTP].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f For details of the "XTP transmitter", visit the website of Extron Electronics.
URL http://www.extron.com/
[WIRED LAN]
Perform the connection setting to use the wired LAN.
1)
Press as to select [WIRED LAN].
2)
Press the <执行> button.
f The [WIRED LAN] screen is displayed.
3)
Press as to select an item, and change the settings according to the operation instructions of the
menu.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
4)
Press as to select [STORE], and press the <执行> button.
f The confirmation screen is displayed.
5)
Press qw to select [OK], and press the <执行> button.
Note
f When using a DHCP server, confirm that the DHCP server is running.
f Consult your network administrator regarding the IP address, subnet mask, and default gateway.
f When [Art-Net SETUP] is set to [ON(2.X.X.X)] or [ON(10.X.X.X)], [WIRED LAN] cannot be selected.
f The network setting is common for the <局域网> terminal and the <DIGITAL LINK> terminal.
f Wired LAN and wireless LAN cannot be used in the same segment.
[WIRELESS LAN]
Set the connection method of wireless LAN and its details.
f To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module
(Model No.: AJ-WM50MC) to the <USB> terminal.
1)
Press as to select [WIRELESS LAN].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
[DISABLE]
Note
f [WIRELESS LAN] cannot be set if the optional Wireless Module (Model No.: AJ-WM50MC) is not attached to the <USB> terminal.
Chapter 4 Settings — [NETWORK] menu
Select this item when connecting the optional DIGITAL LINK output supported device (Model No.:
ET-YFB100C) to the <DIGITAL LINK> terminal.
Select this item when connecting the "XTP transmitter" of Extron Electronics to the <DIGITAL LINK>
terminal.
[ON]
[OFF]
Enter the IP address when a DHCP server is not used.
Enter the subnet mask when a DHCP server is not used.
Enter the default gateway address when a DHCP server is not used.
Select this item when the wireless LAN is to be used.
A device such as a smartphone can be directly connected to the projector even if a wireless LAN
access point is not set up separately because the projector is used as a simplified access point.
For setting procedure of the connection key, refer to "Setting the connection key" (x page 216).
Select this item when the wireless LAN is not to be used.
If a DHCP server exists in the network where the projector is to be
connected, obtains the IP address automatically.
If a DHCP server does not exist in the network where the projector
is to be connected, set [IP ADDRESS], [SUBNET MASK], and
[DEFAULT GATEWAY].
ENGLISH - 215
Advertisement
Table of Contents
