Table of Contents
Advertisement
2)
Press the <执行> button.
f The [SLOT 输入] screen is displayed.
3)
Press as to select [DVI-D1] or [DVI-D2], and press the <执行> button.
f The [DVI-D1] screen or the [DVI-D2] screen is displayed.
4)
Press as to select [EDID MODE].
5)
Press the <执行> button.
f The [DVI-D EDID MODE] screen is displayed.
6)
Press qw to switch [EDID MODE].
f The items will switch each time you press the button.
[DEFAULT]
[SCREEN FIT]
[USER]
f Proceed to Step 11) when [DEFAULT] or [SCREEN FIT] is selected.
7)
Press the <执行> button.
f The [RESOLUTION] screen is displayed.
8)
Press asqw to select [RESOLUTION].
f Select [1024x768p], [1280x720p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], [1440x900p],
[1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
9)
Press the <执行> button.
f The [VERTICAL SCAN FREQUENCY] screen is displayed.
10) Press qw to select [VERTICAL SCAN FREQUENCY].
f Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
f Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
f Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].
g [1920x1080p], [1920x1080i]
11) Press the <执行> button.
f The confirmation screen is displayed.
12) Press qw to select [OK], and press the <执行> button.
Note
f The settings in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] are displayed in [EDID STATUS].
f The resolution and vertical scanning frequency settings may also be required on your computer or video device.
f The computer, video device, or projector in use may require the power to be turned off and on again after configuring settings.
f A signal may not be output with the resolution and vertical scanning frequency that have been set, depending on your computer or video
device.
When the optional Interface Board for DisplayPort 2 input (Model No.: ET-MDNDP10C) is
installed
Setting [SIGNAL LEVEL] in [SLOT 输入] (DisplayPort input)
1)
Press as to select [SLOT 输入].
2)
Press the <执行> button.
f The [SLOT 输入] screen is displayed.
3)
Press as to select [DisplayPort1] or [DisplayPort2], and press the <执行> button.
f The [DisplayPort1] screen or the [DisplayPort2] screen is displayed.
4)
Press as to select [SIGNAL LEVEL].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
148 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Standard setting.
Changes the EDID data according to the [SCREEN FORMAT] setting.
Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
Advertisement
Table of Contents
