Operating The Machine; Control Lever (Iso Pattern) - Hitachi ZAXIS 30U-5N Operator's Manual

Control Lever (ISO Pattern)

d
WARNING:
 Never place any part of body beyond window frame.
It could be crushed by the boom if boom control
lever is accidentally bumped or otherwise engaged.
Never remove the window sash bar.
 Make sure you know the location and function of
each control before operating.
 Do not change the control lever operation pattern.
Failure to do so may result in operation mistake of
the machine.
Labels showing the lever control pattern are provided around
the operator's seat. As illustrated below, the labels indicate the
control patterns. (Refer to the illustration)
Lever Control Partern Label Location
Canopy Roof
Cab Right side in the cab
When a lever is released, it will automatically return to neutral,
and that machine function will stop.
1- Arm Roll-Out
2- Arm Roll-In
3- Swing Left
4- Swing Right
5- Boom Lower
6- Boom Raise
7- Bucket Roll-In
8- Bucket Roll-Out

OPERATING THE MACHINE

MADG-05-006
8
5-1
1
3 4 7
2
1
2
5
7
5
8
6
MADB-01-062
4
3
M1M7-05-001
6
M1M7-05-002