Clean Cab Floor - Hitachi ZAXIS 30U-5N Operator's Manual

Clean Cab Floor

--- as required
IMPORTANT: Only the cab floor can be washed with
water. Take care not to splash other parts of the cab
with water. Do not increase the water pressure speed
by squeezing the hose end. Never use steam to clean
the cab floor. Always clean the cab floor only after
closing ducts (1, 2, and 3) to prevent water from
entering the ducts (1, 2, and 3).
1. Park the machine following the same procedures as
described on page 7-6 for preparation for inspection and
maintenance.
2. Sweep the cab floor clean using a brush, and brush dust
from the cab floor while spraying water. (Sweep out the
mud and dust with a brush as much as possible before
applying water.)
3. When cleaning the floor mat, sweep dust (water) along
the grooves on the floor mat.
4. When cleaning the cab floor with the floor mat removed,
remove only rear mat. Then sweep the dust and/or water
through one cleaning hole.
MAINTENANCE
7-95
1 2 3
MADB-07-044