Hour Meter; Clock; Fuel Gauge; Coolant Temperature Gauge - Hitachi ZAXIS 30U-5N Operator's Manual

Hour Meter

Total (accumulated) machine operation hours counted since
the machine started working, are displayed in the unit of
HOUR (h). One digit after the decimal point indicates tenths
of an hour (6 minutes).

Clock

Indicates the present time. 24h/12h/No display can be
selected.
(Refer to "Clock" for switching the display mode.)

Fuel Gauge

Indicates the remaining fuel amount. Refuel before the
indicator segment reaches "E". When the fuel sensor circuit
is broken or short-circuited, all segments of the fuel gauge
will flash.
IMPORTANT: If all segments flash, the machine is
abnormal. Immediately consult your authorized
Hitachi dealer.

Coolant Temperature Gauge

Indicates the engine coolant temperature. Normally the
segment shows around the center of the scale during
operation. All segments will flash when the coolant
temperature sensor malfunctions or the CAN data can not
be received.
f
NOTE: 20 When the coolant temperature is 20° or lower, the
bottom segment will flash.
IMPORTANT: If all segments flash, the machine is
abnormal. Immediately consult your authorized
Hitachi dealer.

Operating Status Icon Display

Displays icons indicating current status of travel mode (1),
work light (2), muffler filter (3) (ZX50U-5N, 60USB-5N) and
auto shut-down (4) selected by the switch panel.
OPERATOR'S STATION
1-15
1 2 3
MADM-01-014
MADM-01-015
MADM-01-016
MADM-01-017
MADG-01-091
4