Heater Operation (Zx30U-5N, 35U-5N, 50U-5N); Name And Function Of Each Part Of Control Panel - Hitachi ZAXIS 30U-5N Operator's Manual

Heater Operation (ZX30U-5N, 35U-5N, 50U-5N)

1- Control Panel
2- Right Rear Vent
3- Foot Vent
4- Right Front Vent
5- Right Front Vent (Defroster)
f
NOTE: Adjust air flow direction by rotating right front vent
(5) horizontally. It can be used as a defroster.

Name and Function of Each Part of Control Panel

6- Heater Power Switch
Push heater power switch (6) to turn the heater ON.
7- Blower Switch
Heater blower speed is controlled in 3 steps.
8- Temperature Control Switch
The set temperature decreases each time the down
arrow switch is pushed, and increases each time the up
arrow switch is pushed.
9- Defroster Switch
Air will blow out from right front vents (4) and (5).
10- Mode Switch
The air vent location is selected. Each time switch (10) is
pushed, mode indicator (12) changes in the order shown
below.
Air will blow out from right front vents (4) (5)
and right rear vent (2).
Air will blow out from right front vents (4) (5),
foot vent (3) and right rear vent (2).
Air will blow out from right front vents (4) (5)
and foot vent (3).
11- Circulation Air/Fresh Air Selection Switch
Circulation air and fresh air mode can be selected.
OPERATOR'S STATION
10
1-46
5
4
3
11 12
9 8
1
2
MADG-01-084
MADB-01-003
7 6
MADB-01-073