Am/Fm Radio Operation (Cab Equipped Machine); Part Name And Function; Radio Operation - Hitachi ZAXIS 30U-5N Operator's Manual

AM/FM Radio Operation (Cab equipped machine)

Part Name and Function

1- Power Switch
Push this switch to turn ON/OFF the radio.
2- Sound Control Switch (SOUND)
Push this switch to adjust sound (Balance/Bass/Treble).
3- Up/Down Buttons (UP/DOWN)
This button is used to change the radio wave frequency,
adjust the sound parameter and clock setting.
4- Display
Time, radio receiving frequency and operation mode is
displayed.
5- AM/FM Switch (AM/FM)
"FM" and "AM" are switched over alternately each time
the switch is pressed.
The display indicates the receiving station frequency.
6- Display Switch (DISP)
Push this switch to switch over the display between
radio wave frequency and time.
7- Preset Switch (PRESET)
One FM and MW (AM) station per button can be preset
using these respective buttons.
8- Volume Control Button (VOL)
Push this switch to adjust the volume.
Push the button to increase the volume by one step.
Push the button to decrease the volume in a step by
step manner.

Radio Operation

1. Turn the engine key switch to ON position. Push radio
power switch (1) ON.
2. Select either MW (AM) or FM by operating AM/FM switch
(5).
3. Select the station desired to listen using PRESET buttons
(7) or UP/DOWN buttons (3).
4. Adjust the volume and tone according to your
preference.
5. When turning the radio OFF, repress power switch (1).
OPERATOR'S STATION
1-53
5 6
4
7 8
3 2 1
M1NE-01-003