Control Lever (ISO Pattern)
d
WARNING:
Never place any part of the body beyond window
frame. It could be crushed by the boom if boom
control lever is accidentally bumped or otherwise
engaged. Never remove the window sash bar.
Make sure you know the location and function of
each control before operating.
Do not change the control lever operation pattern.
Failure to do so may result in operation mistake of
the machine.
A label showing the control patterns of the levers and pedals is
attached on the right side in the cab.
When a lever is released, it will automatically return to neutral,
and that machine function will stop.
1- Arm Roll-Out
2- Arm Roll-In
3- Swing Right
4- Swing Left
5- Boom Lower
6- Boom Raise
7- Bucket Roll-In
8- Bucket Roll-Out
OPERATING THE MACHINE
8
5-1
1
4
3
7
2
1
2
7
5
8
6
MDCN-01-003
3
4
M104-05-001
6
5
M104-05-002