Tuning Procedure; Station Presetting Procedure; Deletion Of Preset Memory - Hitachi ZAXIS 30U-5N Operator's Manual

Tuning Procedure

1. Manual Tuning Procedure
Push UP button (3) to increase the frequency by
one step. Push DOWN
frequency by one step.
2. Automatic Tuning (Auto-Seeking)
Long push UP
(3) to scan the frequency upward or downward. When
a station is received, the auto-seeking function is
deactivated so that the received frequency station is
tuned in.

Station Presetting Procedure

1. Select MW (AM) or FM by pushing AM/FM switch (5).
2. Long push one of PRESET buttons (7) to save the current
receiving frequency in memory. When the preset
procedure completes, the PRESET button No. flashes 3
times and frequency display becomes ON.
3. Repeat steps 1 through 2 for other PRESET buttons (7).
 Station Auto-Presetting Procedure
Long push of SOUND control switch (2) with the radio
switch ON will search the optimum receiving radio
frequency stations and automatically allocate each station
in preset memory buttons (1 to 6).
f
NOTE: Performing auto-presetting operation will delete the
stations previously saved in memory.
If it is difficult to set the memory of the desired station to the
desired button, conduct preset operation.

Deletion of Preset Memory

If the battery power is disconnected while servicing the
machine or by removing the radio, the preset memory in
PRESET buttons (7) will be deleted. In this case, preset the
stations again.
OPERATOR'S STATION
button (3) to decrease the
button (3) or DOWN button
5
1-54
3
M1NE-01-003
7
3 2
M1NE-01-003