Precautions For Lightning; Object Handling - Hitachi ZAXIS 30U-5N Operator's Manual

Precautions for Lightning

 Lightning may strike the machine.
If lightning comes close, immediately stop the operation,
and take the following action.
 When you are around the machine or operating cab-
less machine, evacuate to a safe place far away from the
machine.
 When you are in the cab, stay in the cab until lightning
has passed and safety is secured. Close the cab doors and
windows. Lower the bucket to the ground, and stop the
engine. Put your hands on your lap to avoid contact with
any metal surfaces. Never go out of the cab.
If lightning strikes the machine or near the machine,
check all of the machine safety devices for any failure after
lightning has passed and safety is secured. If any trouble is
found, operate the machine only after repairing it.

Object Handling

 If a lifted load should fall, any person nearby may be
struck by the falling load or may be crushed underneath it,
resulting in serious injury or death.
 When using the machine for craning operations, be sure
to comply with all local regulations.
 Do not use damaged chains or frayed cables, sables,
slings, or ropes.
 Before craning, position the upperstructure with the
travel motors at the rear.
 When using the machine for craning operations, always
park the machine on a solid and level ground.
 Move the load slowly and carefully. Never move it
suddenly.
 Keep all persons well away from the load.
 Never move a load over a person's head.
 Do not allow anyone to approach the load until it is safely
and securely situated on supporting blocks or on the
ground.
 Never attach a sling or chain to the bucket teeth. They
may come off, causing the load to fall.
SAFETY
032-E01A-0132
S-19
SA-1805
SA-014