Hitachi ZAXIS 30U-5N Operator's Manual page 74

 Preheat Indicator (5)
The machine will automatically check if preheating is
required or not. When preheating is required, preheat
indicator (5) is lit automatically.
 Auto Shut-Down Indicator (7)
When the auto shut-down time is set on the MENU, the
indicator turns ON.
 ECO/PWR Mode Selector Switch (11)
Two engine speed modes, ECO and PWR modes, are
selected and displayed by operating this mode switch.
ECO (Economy) Mode
Although production is slightly reduced more than in the
PWR mode, the fuel consumption and noise levels are
reduced, allowing the machine to operate efficiently.
PWR (Power) Mode
Operate the machine in this mode when performing normal
work.
 Auto-Idle Switch (12)
When the auto-idle switch is turned ON, the indicator
displays ON and the function is enabled.
 Travel Mode Indicator (15)
The travel mode selected by the travel mode switch located
on the switch panel is displayed.
 Work Light Indicator (16)
The indicator is displayed while the work light switch on the
switch panel is turned ON and the work lights on the front
side of the boom and the canopy are lit.
 Muffler Filter Indicator (17) (ZX50U-5N, 60USB-5N)
Displays condition of the muffler filter.
OPERATOR'S STATION
1-14
17
16
15
13
5
7
10
11
MADG-01-090