Sound Control; Digital Clock Setting Procedure - Hitachi ZAXIS 30U-5N Operator's Manual

Sound Control

Pushing SOUND switch (2) with the radio switch ON will
make the sound items adjustable. Each time SOUND switch
(2) is pushed, sound items changes in the order of BAL 
TRE  BAS. Push SOUND switch (2) with BAS adjustment
mode to quit from the sound control mode.
• Balance Adjustment (BAL)
Each time UP button (3) is pushed at BAL adjustment
mode, audio output shifts from L to R by one step. Also,
each time DOWN button (3) is pushed at BAL adjustment
mode, audio output shifts from R to L by one step.
• Treble Level Adjustment (TRE)
Each time UP button (3) is pushed at TRE adjustment
mode, treble level increases by one step. And each push
of DOWN button (3) will decrease treble level by one step.
• Bass Level Adjustment (BAS)
Each time UP button (3) is pushed at BAS adjustment
mode, bass level increases by one step. And each push of
DOWN button (3) will decrease bass level by one step.

Digital Clock Setting Procedure

Long push of DISP button (6) at the clock display mode
makes the clock adjustable.
Pushing DISP button (6) at the clock adjustment mode will
switch over the time unit from hours to minutes. Push UP or
DOWN button (3) to adjust corresponding time unit.
Push DISP button (6) at minutes adjustment mode to quit
the time adjustment.
OPERATOR'S STATION
1-55
3
6
3
Long push DISP button (6)
Push UP key (3)
Push DISP key (6)
Push UP key (3)
Push DISP key (6)
2
M1NE-01-003
M1NE-01-003
Time Display Mode
Push DOWN key (3)
Push DOWN key (3)
M1NE-01-007