Table of Contents
Advertisement
Super X13SEED-F/-SF User's Manual
HTTP Boot Configuration
HTTP Boot Policy
Use this feature to set the HTTP boot policy. The options are Apply to all LANs, Apply to
each LAN, and Boot Priority #1 instantly.
HTTPS Boot Checks Hostname
Use this feature to allow HTTPS Boot to check if the hostname of the TLS certificate matches
the hostname provided by the remote server. Selecting Disabled is a violation of RFC6125.
The options are Enabled and Disabled (WARNING: Security Risk!!).
Priority of HTTP Boot
Instance of Priority 1
This feature sets the rank target port. The default setting is 1.
Select IPv4 or IPv6
This feature specifies which connection the target LAN port should boot from. The options
are IPv4 and IPv6.
Boot Description
Use this feature to enter a boot description. The boot description cannot be longer than 75
characters. Be sure to enter a boot description, otherwise the boot option for the URI cannot
be created.
Boot URI
Enter a Boot Uniform Research Identifier (URI). The boot URI cannot be longer than 128
characters. This Boot URI determines how IPv4 Boot Option and IPv6 Boot Option will be
created. This feature is only supported on Dual or EFI Boot Mode.
Supermicro KMS Server Configuration
Supermicro KMS Server IP address
Use this feature to enter the Supermicro Key Management Service (KMS) server IPv4 address
in dotted-decimal notation.
Second Supermicro KMS Server IP address
Use this feature to enter the second Supermicro KMS server IPv4 address in dotted-decimal
notation.
Supermicro KMS TCP Port number
Use this feature to enter the Supermicro KMS TCP port number. The valid range is 100–9999.
The default setting is 5696.
96
Advertisement
Table of Contents
