Supermicro X13SEED-F User Manual page 90

Super X13SEED-F/-SF User's Manual
Redirection After POST
Use this feature to enable or disable legacy console redirection after BIOS POST. When
BootLoader is selected, legacy console redirection is disabled before booting the OS. When
Always Enable is selected, legacy console redirection remains enabled upon OS bootup.
The options are Always Enable and BootLoader.
Serial Port for Out-of-Band Management/Windows Emergency Management Services
(EMS)
The feature allows you to configure Console Redirection settings to support Out-of-Band
Serial Port management.
Console Redirection EMS
Select Enabled to use the SOL port for Console Redirection. The options are Disabled and
Enabled.
Console Redirection Settings (Available when "Console Redirection
EMS" above is set to Enabled)
Out-of-Band Mgmt Port
The feature selects a serial port in a client server to be used by the Microsoft Windows
Emergency Management Services (EMS) to communicate with a remote host server. The
options are COM1 and SOL. Note that the SOL option is unavailable if there is no BMC
support.
Terminal Type EMS
Use this feature to select the target terminal emulation type for Console Redirection. Select
VT100 to use the ASCII character set. Select VT100Plus to add color and function key
support. Select ANSI to use the extended ASCII character set. Select VT-UTF8 to use
UTF8 encoding to map Unicode characters into one or more bytes. The options are VT100,
VT100+, VT-UTF8, and ANSI.
Bits Per Second EMS
This feature sets the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in the host computer and the client computer. A
lower transmission speed may be required for long and busy lines. The options are 9600,
19200, 57600, and 115200 (bits per second).
90