Supermicro X13SEED-F User Manual page 111

Secure Boot

This section displays the contents of the following secure boot features:
•
System Mode
•
Secure Boot
Secure Boot
Use this feature to enable secure boot. The options are Disabled and Enabled.
Secure Boot Mode
Use this item to configure Secure Boot variables without authentication. The options are
Standard and Custom.
CSM Support
Use this feature to enable or disable CSM Support. This feature is for manufacturing
debugging purposes. The options are Disabled and Enabled.
Enter Audit mode

This submenu can only be used if the current System Mode is set to User (refer to Exit
Deployed Mode). The PK variable will be erased on transition to Audit Mode.
 Key Management
Provision Factory Defaults
Use this feature to install the factory default secure boot keys after the platform reset and
while the system is in setup mode. The options are Disabled and Enabled.

Restore Factory Keys
Force System to User Mode. Install factory default Secure Boot key databases.
 Reset to Setup Mode
This feature deletes all Secure Boot key databases from NVRAM.
 Enroll EFI Image
This feature allows the image to run in Secure Boot Mode. Enroll SHA256 Hash Certifi-
cate of the image into the Authorized Signature Database.
111
Chapter 4: UEFI BIOS