Supermicro X13SEED-F User Manual page 107

Chapter 4: UEFI BIOS
Station MAC Address (Available when "Configuration Address Source" is set to
Static)
This feature displays the Station MAC address for this computer. Mac addresses are six
two-digit hexadecimal numbers.
Gateway IP Address (Available when "Configuration Address Source" is set to
Static)
This feature displays the Gateway IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 172.29.0.1).
VLAN (Available when "Update IPMI LAN Configuration" is set to Yes)
This feature displays the status of VLAN support. The options are Disable and Enable.
VLAN ID (Available when "VLAN" is set to Enable)
Use this feature to create a new LAN ID by using an existing VLAN or creating a new VLAN
ID. Enter a valid value between 0–4094.
********************************
Configure IPv6 Support
********************************
IPv6 Address Status
This feature displays the status of the IPv6 address.
IPv6 Support
Use this feature to enable IPv6 support. The options are Enabled and Disabled.
Configuration Address Source (Available when "IPv6 Support" is set to Enabled)
Use this feature to select the source of the IPv6 connection. If Static Configuration is selected,
you will need to know the IP address of IPv6 connection and enter it to the system manually
in the field. If the Dynamic Host Configuration Protocol (DHCP) related option is selected,
the BIOS will search for a DHCP server in the network that is attached to and request the
next available IP address for this computer. The options are Static Configuration, DHCPv6
Stateless, and DHCPv6 Stateful.
IPv6 Address (Static) (Available when "Configuration Address Source" is set to
Static Configuration)
This feature displays the station IPv6 address. Press <Enter> to change the setting.
Prefix Length (Available when "Configuration Address Source" is set to Static
Configuration)
This feature displays the prefix length. Press <Enter> to change the setting.
107