Supermicro X13SEED-F User Manual page 77

Enable ADR
Select Enable for Asynchronous DRAM Refresh (ADR) support to enhance memory
performance. The options are Disable and Enable.
Legacy ADR Mode (Available when "Enable fADR" is set to Disable and "Enable
ADR" is set to Enable)
Use this feature to support the Legacy ADR mode to enhance memory performance. The
options are Disable, Enable, and Auto
DDR 2x Refresh Enable
Select Enable for memory 2x refresh support to enhance memory performance. The op-
tions are Auto, Disable, and Enable.
CXL Type 3 Legacy
Use this feature to enable or disable legacy support for CXL Type 3 devices. The options
are Enable and Disable.
Outlier Check Disable
This feature allows you to set whether DIMM Outlier Check and Mapout occurs. When
outliers exceed a threshold, the DIMM will be mapped out and not report to the OS. Select
Enable to allow the Check and Mapout to occur. The options are Enable and Disable.
Outlier Threshold Modifier
Use this feature to modify the base outlier threshold used by the Outlier Check. The base
outlier threshold is 14. Enter 101 in this setting to modify the threshold by -1 (threshold
will be -15). Enter 1 to modify the threshold by +1 (threshold will be -13). The default
setting is 0.
Memory Topology
This feature displays the information of onboard memory modules as detected by the
BIOS, for example:
P1-DIMMA1: 4800MT/s Hynix DRx8 32GB RDIMM
77
Chapter 4: UEFI BIOS