Supermicro X13SEED-F User Manual page 38

Super X13SEED-F/-SF User's Manual
Power Button
Press the button at SW2 to power on the motherboard. This button can also power off the
motherboard instantly or when held for four seconds. The settings for this button can be
configured with the Power Button Function feature in the UEFI BIOS.
Unit Identifier Switch/UID LED Indicator
A Unit Identifier (UID) switch and an LED Indicator are located on the motherboard. The UID
switch is located at JUIDB2 on the rear panel I/O. The UID LED is located near the UID
switch at LED4. When you press the UID switch, the UID LED will be turned on. Press the
UID switch again to turn off the LED indicator. The UID Indicator provides easy identification
of a system unit that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information on
IPMI, refer to the IPMI User's Guide posted on our website at
com/support/manuals/.
MH1 MH2
FAN3
FAN4
JPME2
MH3
JB1
JBR1
JDBG1 CPU
JVRM1
JSPD1
JMD1
2280
MT1_1
22110
MT1_2
JSXB1C
MH7 BIOS
LICENSE
JNCSI1 X13SEED-F
REV:1.01
DESIGNED IN USA
PCH
JP2
JIPMB1
JPFR3
JPFR2
JP1
JP13
JBM1
JPT1 JPL1
BMC
JL1
JCP1
JPFR1
1
JLAN1
MH9
3 2
MH10
MH11 MH12
JKVM1
SW2
LED4
PRESS FIT
LED7 LED6
MH4
FAN1
FAN2
JMD2
JRK1
BT1
2280
MT2_1
22110
MT2_2
MH6 MH5
MH8
UID Switch
Pin Definitions
Pin#
1
2
3
4
UID LED
Pin Definitions
Color
Blue: On
1. Power Button
2. UID Switch
3. UID LED (LED4)
38
https://www.supermicro.
Definition
Ground
Ground
Button In
Button In
Status
Unit Identified