Supermicro X13SEED-F User Manual page 70

Table of Contents

Advertisement

Super X13SEED-F/-SF User's Manual
DCU IP Prefetcher
This feature allows the system to use the sequential load history, which is based on the
instruction pointer of previous loads, to determine whether the system will prefetch additional
lines. The options are Enable and Disable.
LLC Prefetch
If this feature is set to Enable, LLC (hardware cache) prefetching on all threads will be
supported. The options are Disable and Enable.
Homeless Prefetch
Use this feature to enable or disable Homeless Prefetch. Select Auto to use the hardware
default setting. The options are Disable, Enable, and Auto.
FB Thread Slicing
Use this feature to enable or disable Fill Buffer (FB) Thread Slicing per thread. The options
are Disable and Enable.
Extended APIC
Use this feature to enable or disable the Extended Advanced Programmable Interrupt
Controller (APIC). Based on the Intel Hyper-Threading technology, each logical processor
(thread) is assigned 256 APIC IDs (APIDs) in 8-bit bandwidth. When this feature is set to
Enable, the APIC ID will be expanded from 8 bits to 16 bits to provide 512 APIDs to each
thread to enhance CPU performance. The options are Disable and Enable.
Intel Virtualization Technology
Select Enable to enable Intel Vanderpool Technology for Virtualization platform support, which
will allow multiple operating systems to run simultaneously on the same computer to maximize
system resources for performance enhancement. The options are Disable and Enable.
Note: Reboot the system for any change of the setting to take effect.
Enable SMX
Select Enable to support Safer Mode Extensions (SMX), which provides a programming
interface for system software to establish a controlled environment to support the trusted
platform configured by the end user and to verify a virtual machine monitor before it is allowed
to run. The options are Disable and Enable.
PPIN Control
Select Unlock/Enable to use the Protected Processor Inventory Number (PPIN) control in the
system. The options are Lock/Disable and Unlock/Enable.
70

Advertisement

Table of Contents
loading

This manual is also suitable for:

X13seed-sf

Table of Contents