Supermicro X13SEED-F User Manual page 87

Super IO Configuration

The following information is displayed:
•
Super IO Chip
Serial Port 1 Configuration
Serial Port 1
Select Enabled to enable serial port 1. The options are Disabled and Enabled.
Device Settings (Available when "Serial Port 1" is set to Enabled)
This feature displays the base I/O port address and the Interrupt Request address of serial
port 1.
Change Settings (Available when "Serial Port 1" is set to Enabled)
This feature specifies the base I/O port address and the Interrupt Request address of serial
port 1. Select Auto for the BIOS to automatically assign the base I/O and IRQ address
to serial port 1. The options are Auto, (IO=3F8h; IRQ=4;), (IO=2F8h; IRQ=4;), (IO=3E8h;
IRQ=4;), and (IO=2E8h; IRQ=4;).
SOL Configuration
SOL
Select Enabled to enable SOL (COM). The options are Disabled and Enabled.
Device Settings (Available when "SOL" is set to Enabled)
This feature displays the base I/O port address and the Interrupt Request address of serial
port 1.
Change Settings (Available when "SOL" is set to Enabled)
This feature specifies the base I/O port address and the Interrupt Request address of SOL.
Select Auto for the BIOS to automatically assign the base I/O and IRQ address to serial
port 1. The options are Auto, (IO=2F8h; IRQ=3;), (IO=3F8h; IRQ=3;), (IO=3E8h; IRQ=3;),
and (IO=2E8h; IRQ=3;).
87
Chapter 4: UEFI BIOS