Supermicro X13SEED-F User Manual page 110

Super X13SEED-F/-SF User's Manual
Supermicro Security Erase Configuration

This section displays the following information if a storage device is detected by the system:
•
HDD Name
•
HDD Serial Number
•
Security Mode
•
Estimated Time
•
HDD User Pwd Status
Security Function
Select Password to set an HDD/SATA password, which will allow you to configure the
security settings of the HDD/SATA device. Select Security Erase-Password to enter a SATA
user password to erase the password and the contents previously stored in the HDD/SATA
device. Select Security Erase-Without Password to use the manufacturer default password
"111111111" as the SATA user password and to erase the contents of the HDD/SATA device
by using this default password. The options are Disable, Set Password, Security Erase-
Password, Security Erase-PSID, and Security Erase-Without Password.
Note: Security Erase-PSID is only supported by the M.2 TCG function.
Password
Use this feature to set the SATA user password, which will allow you to configure the
Supermicro Security Erase settings by using the SATA user password.
HDD Security Configuration
This section is available for configuration if a storage device is detected by the system.
HDD Password Description:
Use this feature to set, modify, and clear both HDD User Password and HDD Master
Password. An installed HDD User Password is required to enable HDD security features.
HDD Master Password can be modified only when successfully unlocked in POST. If the
"Set HDD Password" option is grayed out, do a power cycle to enable it.
HDD PASSWORD CONFIGURATION:
Set User Password
Use this option to set up the HDD User Password. Power cycle the system after setting
the HDD User Password.
110