Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
DISA auto finish time
[CONF]#:
(0000-2359)#: DISA function finish time (24 hour)
This sets a finish time for DISA working. DISA calls received after the DISA auto finish time will be
handled as an ordinary line call.
Related step
FF2 1# (01-48)# 20# , DISA line setting
FF2 1# (01-48)# 21# , DISA auto start time
External relay control - Exchange line setting for LRB (Loud Ringing Bell)
0#: External relay control and LRB are not set
1#: External relay control and LRB are set
Sets which exchange lines are monitored by the LRB function.
Related step
FF1 2# 1# 24# , External relay control
Dial tone detection
0#: DT detection not required.
1#: DT detection required.
This sets whether dial tone detection is required before the system sends dialling digits.
Exchange line tenant group setting
1#: Tenant No.1
2#: Tenant No.2
3#: Tenant No.3
4#: Tenant No.4
5#: Tenant No.5
6#: Tenant No.6
7#: Tenant No.7
8#: Tenant No.8
This is specifies the Tenant Group number. for each outside line which is allocated to line Group
0. When '9' is dialled, a free line from the designated Tenant Group is seized automatically.
Related steps
FF2 1# (01-48)# 3# , Line group 0
FF3 (001-144)# 36# , Extension tenant group setting
FF2-1#-(01-48)#-22#-(0000-2359)#
Clear finish time: 2359
FF2-1#-(01-48)#-23#-(0 or 1)#
FF2-1#-(01-48)#-24#-(0 or 1)#
FF2-1#-(01-48)#-25#-(0 or 8)#
[DISA END TIME]
[EPI CNTRL SET]
[D/T DETECTION]
[SP. MCO TENANT]
79
Issue 15
2.x
2.x
2.x
3.1
Advertisement
Table of Contents
