Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
ID code-remote programming
[CONF]#:
(0000-9999)#: Remote code.
Remote programming of the system can be done through a telephone line when the optional
Remote Administration Interface (RAI) card is fitted. This step stores a 4 digit ID code to restrict
access to authorised persons only.
This step has been replaced by FF1-4#-1# with CPC-EX v1.0
ID code-system programming
[CONF]#:
(0000-9999)#: ID Code
By default, system programming is only possible from the operator phone. But by dialling 78 and
this code at a display key telephone, the extension is enabled as a programming telephone.
Dialling the sequence a second time disables the extension as a programming telephone. Only
one extension can be enabled at one time.
This step has been replaced by FF1-4#-2# with CPC-EX v1.0
FF1-4#-(0000-9999)#
Clear to initial DATA (9999)
FF1-5#-(0000-9999)#
Set default code 9999
[SET 4DIGIT DATA]
[SET 4DIGIT DATA]
44
Issue 15
2.x
2.x
Advertisement
Table of Contents
