Panasonic DBS Series Programming Manual page 30

Panasonic Digital Business System - Programming Manual
April 1997
Operator-transfer reminder-exchange lines
0#: No recall after an exchange line call put on hold by the operator
1#: Recall 20 secs.
2#: Recall 40 secs.
3#: Recall 60 secs.
4#: Recall 80 secs.
5#: Recall 100 secs.
6#: Recall 120 secs.
7#: Recall 140 secs.
8#: Recall 160 secs.
9#: Recall 180 secs.
10#: Recall 200 secs.
11#: Recall 220 secs.
12#: Recall 240 secs.
If an exchange line call is not answered within the specified time after having been transferred by
the operator extension, the recall warning tone starts to sound to indicate that the call has not been
answered. This setting is only applicable to the operator extensions.
Operator-call on hold reminder-internal calls
0#: No recall after an exchange line call put on hold by the operator.
1#: Recall 20 secs.
2#: Recall 40 secs.
3#: Recall 60 secs
4#: Recall 80 secs.
5#: Recall 100 secs.
6#: Recall 120 secs.
7#: Recall 140 secs.
8#: Recall 160 secs.
9#: Recall 180 secs.
10#: Recall 200 secs.
11#: Recall 220 secs.
12#: Recall 240 secs.
If an internal call is put on hold by the operator extension , the hold recall warning tone starts to
sound to indicate that the call is still holding after the time specified here. This setting is only
applicable to the operator extensions.
FF1-3#-3#-(0-12)#
FF1-3#-4#-(0-12)#
30
Issue 15
[CO TRF REC ATT]
[INT HLD REC ATT]
2.x
2.x