Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
Call logging - call unit cost setting
1-9999#: Charge unit: 0.1~999.9 pence
This specifies the unit cost in pence for each meter pulse and is used to calculate the call cost for
display key telephones and the call logging output.
Note: Meter Pulse Detection cards (VB3667) must be installed on each line and meter pulses sent
from the network provider to use this facility
FF1-2#-1#-22#
[NOT USED]
FF1-2#-1#-23#
[NOT USED]
Loud ring bell / Paging Mode setting
0#:
Paging mode
1#:
Control for exchange lines
2#:
Control for extension
This specifies the control source for the external bell option if an external bell is used.
Related steps
FF2 1# 23# , External Relay Control - Exchange Line Setting
FF1 1# 25# , External Relay Control - Extension Port Setting
External relay control - Extension port setting
This specifies the extension port which when ringing activates the optional external bell.
Related step
FF1 2# 1# 24# - Loud ring bell / Paging mode setting
Delayed ringing
0#: Inactivate
1#: Activate
This specifies whether delayed ringing is active or not for incoming exchange line calls. The Call
Forward No Answer Timer is also the time which a call will ring before the Delayed Ringing
assignment is used. If Call Forward No Answer is set the incoming call will still use the Delayed
Ringing assignment when this step is set to 1#.
Note1: The Operator overflow assignment is also used for Delayed Ring Assignment.
Note2: Both Operator Overflow and Delayed Ringing can be active together.
Related steps
FF1 3# 23# - Call Forward No Answer Transfer Time
FF4 3# - Operator Overflow Ring / Delayed Ring Assignment
FF1-2#-1#-21#-(1-9999)#
Initial value:
4.4 pence
FF1-2#-1#-24#-(0 - 2)#
FF1-2#-1#-25#-(001-144)#
FF1-2#-1#-26#-(0 or 1)#
[SET CHARGE]
[EPI CTRL MODE]
[EPI CTRL EXT]
[DELAYED RING]
18
Issue 15
2.x / 4.1 / ISDN 1.2
2.x
2.x
2.x
Advertisement
Table of Contents
