Panasonic DBS Series Programming Manual page 78

Panasonic Digital Business System - Programming Manual
April 1997
Call logging start time
0#: No time interval set
1#: 2 secs after dialling.
2#: 4 secs.
3#: 6 secs.
4#: 8 secs.
5#: 10 secs.
6#: 12 secs.
7#: 14 secs.
8#: 16 secs.
9#: 18 secs.
10#: 20 secs.
11#: 22 secs.
12#: 24 secs.
13#: 26 secs.
14#: 28 secs.
15#: 30 secs.
This specifies how soon after dialling the system starts to time an exchange line call and display
the elapsed call time on a display keyset.
FF2-1#-(01-48)#-18#
FF2-1#-(01-48)#-19#-
DISA (Direct Inward System Access) line setting
0#: DISA disabled
1#: DISA enabled
This specifies whether a line port is a DISA line or standard PSTN line for incoming calls.
Outgoing calls can made on the line as normal subject to call barring.
Related steps FF2 1# (01-48)# 21# , DISA auto start time
FF2 1# (01-48)# 22# , DISA auto finish time
FF1 2# 1# 30# , Un answered DISA call transfer
FF1 2# 1# 31# , # key feature in DISA call
FF1 3# 26# , DISA inter-signal time
FF1 3# 27# , DISA no answer timer
FF1 3# 30# , DISA cut timer
DISA auto start time
[CONF]#:
(0000-2359)#: DISA function start time (24 hour)
This sets a start time for DISA working. DISA calls received prior to the DISA auto start time will
be handled as an ordinary line call.
Related step FF2 1# (01-48)# 20# , DISA line setting
FF2 1# (01-48)# 22# , DISA auto finish time
FF2-1#-(01-48)#-17#-(0-15)#
[NOT USED]
[NOT USED]
FF2-1#-(01-48)#-20#-(0 or 1)
FF2-1#-(01-48)#-21#-(0000-2359)#
Clear start time: 0000
[CONNECT TIMER]
[ENABLE DISA]
[DISA START TIME]
78
Issue 15
2.x
2.x
2.x