Panasonic DBS Series Programming Manual page 59

Panasonic Digital Business System - Programming Manual
April 1997
Day Mode - DDI Busy / No Answer Mode
In Day Mode, if the DDI destination is busy or not answered at the extension or group specified in
the DDI table, the call can be routed to the Operator Extension, specified transfer extension ( FF1
6# 5# 5# ) or terminated
Related Step: FF1 6# 5# 5# - Day Mode - DDI Transfer Telephone Setting
Day Mode - DDI Transfer Telephone Setting
In Day Mode, if an incoming DDI call is not answered it can be routed to a specified extension or
group. Each DDI can be given its own alternative destination.
Related Step: FF1 6# 5# 4# - Day Mode - DDI Busy / No Answer Mode
Night Mode - DDI Ring Mode
This table is used to allocate each DDI stored in the step FF1 6# 5# (DDI)# 1# to ring to an
extension or group. There is a setting for each DDI number. The locations 1-144/1-200 correspond
to the locations in the other DDI steps. Extension and group are as ISDN v1.2, private wire is to
call across a private circuit to a connected system and operator will camp the call onto the
operator extension ( even when it is busy ). The setting will automatically configure FF1 6# 5# 3#
to accept the correct format of data.
Related Steps: FF1 6# 5# (DDI)# 1# (N - NNNNNN)#
FF1 6# 5# (DDI)# 7# (NNNN)#
FF1 6# 5# (1-200)# 4# (0-2)#
0# To Operator Extension
1# Terminate Call
2# To Alternative Destination Extension In Step FF! 6# 5# 5#
FF1 6# 5# (1-200)# 5# (NNNN)#
NNNN# Extension or Group Virtual Extension Number
FF1 6# 5# (1-200)# 6# (0-3)#
0# Extension
1# Group
2# Private Wire
3# Operator
59
Issue 15
CPC-EX v2.1
CPC-EX v2.1
CPC-EX 2.1