Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
System-call hold reminder-hunting group
0#:
No call reversion to transferring extension after incoming call is transferred.
1#:
Recall 20 secs. after incoming call is transferred.
2#:
Recall 40 secs.
3#:
Recall 60 secs.
4#:
Recall 80 secs.
5#:
Recall 100 secs.
6#:
Recall 120 secs.
7#:
Recall 140 secs.
8#:
Recall 160 secs.
9#:
Recall 180 secs.
10#:
Recall 200 secs.
11#:
Recall 220 secs.
12#:
Recall 240 secs.
If a transferred incoming call is not answered by a hunting group member within the specified time
after having been put on hold from an extension , the call rings back to the transfer's extension
after the specified time. This setting is only applies to extension phones.
Operator-call hold reminder-park hold
0#: Recall 3 minutes after an exchange line call put on park hold by the operator.
1#: Recall 20 seconds after an exchange line call put on park hold by the operator.
2#: Recall 40 secs.
3#: Recall 60 secs.
4#: Recall 80 secs.
5#: Recall 100 secs.
6#: Recall 120 secs.
7#: Recall 140 secs.
8#: Recall 160 secs.
9#: Recall 180 secs.
10#: Recall 200 secs.
11#: Recall 220 secs.
12#: Recall 240 secs.
If an exchange line call is put on park hold by the operator and not returned to within the specified
time, the warning tone starts to sound to indicate that the time has been exceeded. The hold
reminder can be set within the range of 20-240 seconds.
FF1-3#-11#-(0-12)#
FF1-3#-12#-(0-12)#
34
Issue 15
[HNT RECALL EXT]
[PARK RECALL ATT]
2.x
2.x
Advertisement
Table of Contents
