Cutting Units - Toro Groundsmaster 3000 Service Manual

Cutting Units

If machine is operated under normal conditions, lubri­
cate castor bearings and bushings with No. 2 general
purpose lithium base grease or molybdenum base
grease, after every 8 hours of operation or daily, which­
ever comes first. Lubricate fittings immediately after ev­
ery washing, regardless of the interval listed.
Guardian 84 Recyler Cutting Unit
Product Records and Maintenance
Before servicing or making adjustments to the
machine, stop engine and remove key from the
switch.
Figure 7
Page 2 – 6
CAUTION
Groundsmaster 3000/3000–D