Toro Groundsmaster 3000 Service Manual page 15

Safety and Instruction Decals
The following safety and instruction decals are mounted on the cutting unit. If any decal becomes damaged or illegible,
install a new decal. Part numbers are listed below or in your parts catalog.
On Each Corner Of
Cutting Unit
(Part No. 43–8480)
On Gearbox Base
(Part No. 93–6697)
On Front of Cutting
Unit
(Part No. 93–7818)
Replaces Decal Part No.
68–8340 for CE
On Each Corner Of
Cutting Unit
(Part No. 93–7815)
Replaces Decal Part No.
43–8480 for CE
On Front Deck Hanger
(Part No. 93–4690)
Groundsmaster 3000/3000–D
(Guardian 72 Recycler Cutting Unit)
On Left Caster Arm
(Part No. 93–0299)
On Deck Channels, Under Covers
On Front of Deck
(Part No. 88–1270)
On Right Rear Top of Deck
(Part No. 94–3392)
Page 1 – 9
On Front of Cutting Unit
(Part No. 68–8340)
(Part No. 85–6410)
On Right Rear Top of Deck Under Cover
(Part No. 85–6120)
On left Rear Top of Deck
(Part No. 93–4691)
On Deck Channels, Under Covers
(Part No. 93–7814)
Replaces Decal Part No. 85–6410 for CE
Safety