Special Tools
Order special tools from the TORO SPECIAL TOOLS
AND APPLICATIONS GUIDE (COMMERCIAL PROD-
UCTS) .
Multimeter
The meter can test electrical components and circuits
for current, resistance, or voltage.
NOTE: Toro recommends the use of a DIGITAL Volt–
Ohm–Amp multimeter when testing electrical circuits.
The high impedance (internal resistance) of a digital me
ter in the voltage mode will make sure that excess cur
rent is not allowed through the meter. This excess
current can cause damage to circuits not designed to
carry it.
Skin–Over Grease
Special non–conductive grease which forms a light pro
tective skin which helps waterproof electrical switches
and contacts.
Groundsmaster 3000/3000–D
Some tools may also be available from a local supplier.
Page 6 – 3
Figure 1
Figure 2
Electrical System