Loading Small Cut Sheets Or Fine Art Paper - Epson Stylus Pro 7880 User Manual

64 | Handling Paper and Other Media
Note: For heavy paper,
you may need to increase
the suction by pressing
the u button. This helps
hold the paper in place
during loading and
printing.
For lightweight paper,
decrease the suction by
pressing the d button.
Caution: To avoid
damaging the printer,
never move the paper
lever during printing, or
while the P Power or
Pause light is flashing.
4. Feed the sheet into the paper slot. Make sure the right and bottom edges
of the paper are straight and aligned with the horizontal and vertical
lines on the printer.
5. Pull the paper lever forward to the
6. Press the Pause button or wait a few seconds. The printer feeds the
sheet into printing position automatically and
LCD display.
7. Print your page. After it is finished, the sheet stays in the printer.
8. To remove your print, press the
while holding the printed sheet.

Loading Small Cut Sheets or Fine Art Paper

You can load paper without releasing the paper lever. This prevents
scratching that might damage fine art paper and is also easier, especially
when you are loading small sheets.
1. Make sure the printer is turned on and the roll paper cover is closed.
2. Press the l Paper Source button until the
LCD display.
Secured
button or release the paper lever
64
position.
appears on the
READY
Sheet icon appears on the