Table of Contents
Advertisement
Loading Cut Sheets
Use the procedure below to load cut sheets.
Up to 100 cut sheets can be loaded in the ASF.
1
Pull out the ASF guide and pocket guide to match the length of the paper.
2
Load the cut sheets so they are aligned with the
paper cover.
When reading MICR characters, load the sheets so the magnetic ink characters are
facing away from and toward the bottom of the product. When loading multiple
sheets, first align them on their lower right corners.
When loading multiple sheets of different sizes, also align them on their lower right
corners.
CAUTION
Note the precautions below. Failure to satisfy these conditions can result in cut sheet reading
not starting or cause jamming.
• Use cut sheets that conform to product specifications
• Make sure there are no clips on or stables in the cut sheets, and make sure that the cut
sheets are not curled, bent or wrinkled
Chapter 5 Handling the Product
mark on the right side of the roll
76
Advertisement
Table of Contents
