Checking Error Messages And Lights - Epson Stylus Pro 7880 User Manual

164 | Solving Problems
Message
BORDERLESS ERROR
LOAD CORRECT SIZE
PAPER
CARRIAGE LOCKED
RELEASE THE CARRIAGE
LOCK
CLEANING ERROR
PRESS PAUSE BUTTON
CLEANING ERROR
REMOVE THICK PAPER

Checking Error Messages and Lights

The control panel includes various lights and an LCD display to indicate the
status of the printer:
Power
button and
light
Pause or reset
button and light
When your paper runs out, ink is low, or a problem occurs, a message
appears on the LCD display, and the lights on the control panel come on or
flash. The following table lists the messages in alphabetical order and
includes an explanation and instructions for correcting the problem.
Explanation
The borderless setting is
selected and paper that doesn't
support borderless printing is
loaded.
The print head is locked.
Head cleaning did not clear the
nozzles.
Paper is too thick for head
cleaning.
Printer could not feed the
printed page.
Paper
Ink
light
light
LCD display
Response
Change the setting in the printer driver or load
different paper.
Remove the bracket securing the print head;
see page 35.
Run the head cleaning utility again. If the
nozzles are still clogged, contact Epson.
Release the paper lever to remove the paper.
Head cleaning starts automatically. After
cleaning, reload paper.
Remove the print.
164
Paper Feed up button
Enter or cut
button
Menu or
cleaning
button
Paper Feed down button
Left arrow or Paper
Source button