Epson Stylus Pro 7880 User Manual page 155

Caution: Be careful not
to spill ink from the
maintenance tank when
removing it. Hold it upright
at all times and dispose of
it carefully.
Maintaining and Transporting the Printer
The icons show the percentage of space remaining in the tank(s) as follows:
100–81%
80–61%
60–41%
40–21%
The Epson Stylus Pro 7880 has one maintenance tank (on the right side),
and the Pro 9880 has two (one on either side). Replacement tanks are
available from Epson (part number C12C890191). See page 12 for details.
The printer will not print if one of the maintenance tanks is full. On the
Epson Stylus Pro 9880, the right tank is used more than the left. To
maximize tank life, you can switch the tanks when the right tank reaches
approximately 40% to 60% of capacity.
Follow these steps to replace the tank:
1. Make sure the printer is not printing or performing any other operations
( or
READY PAPER OUT
2. If you have the Epson Stylus Pro 9880, check the LCD display to
determine which tank needs to be replaced (left or right).
3. Grasp the handle at the bottom of the tank (on the side of the printer)
and gently pull out the maintenance tank.
4. Place the used tank in the plastic bag included with the new tank.
5. Insert the new tank.
155
20% to nearly full
Tank nearly full
Tank full
Tank error or no maintenance tank
should appear on the LCD display).
| 155