Using The Auto Take-Up Reel - Epson Stylus Pro 7880 User Manual

192 | Installing and Using Optional Equipment

Using the Auto Take-Up Reel

To install the Auto Take-Up Reel, follow the instructions in the manual that
came with it.
To use the paper guides packaged with the Auto Take-Up Reel, first remove
the paper guides and holders that came with the printer, if you installed
them. Then attach the paper guides packaged with the Auto Take-Up Reel.
The table below describes the status of the Auto Take-Up Reel as indicated
by the light.
Sensor
Sensor light status
On
Flashing
Flashing rapidly
Off
192
Description
The Auto Take-Up Reel is ready to take in your printout.
The Auto Take-Up Reel sensor is not aligned; see
page 199 to adjust the sensor.
The Auto Take-Up Reel has an error and stopped
working; check the installation and see page 199 for
additional solutions.
The Auto Take-Up Reel is turned off.