Epson Stylus Pro 7880 User Manual page 209

Menu setting
PAPER FEED ADJUST
DRYING TIME
PAPER SUCTION
M/W ADJUSTMENT
MAINTENANCE menu
CUTTER REPLACEMENT
BK INK CHANGE
POWER CLEANING
CLOCK SETTING
CONTRAST
ADJUSTMENT
HEAD ALIGNMENT menu (see page 139 for details)
PAPER THICKNESS
ALIGNMENT
NETWORK SETUP menu (see the on-screen Network Guide for details)
NETWORK SETUP
IP ADDRESS SETTING
209
Control Panel Summary
Description
Adjusts the amount of paper fed during printing to
help eliminate banding (–0.70 to 0.70%). Choose a
lower value if you see white lines on your prints,
or a higher value if you see dark lines.
Selects a drying time for ink to avoid smearing
(from 0 to 10 seconds).
Adjusts the suction pressure when printing on thin
paper or backlight film.
STANDARD
–1 to –4
Adjust the intensity of the MicroWeave pattern to
improve print quality, but lower print speed.
STANDARD
1 or 2
Starts procedure to replace the paper cutter blade;
see page 151 for details.
Starts the procedure to replace the black ink
cartridge type; see page 145 for details.
Starts a print head power cleaning cycle; see
page 138 for details.
Sets the printer date and time settings; see
page 149 for details.
Adjusts the contrast of the LCD display.
Select the paper thickness for aligning the print
head.
Select and start running print head alignment of
various types.
Select to enable or disable network printing.
Select to set the IP address automatically or
manually.
| 209