Epson Stylus Pro 7880 User Manual page 75

7. Examine the printed pattern for the most evenly overlapping lines.
Choose the number with the most even lines. In the example shown
above, the lines under number 4 are the most even.
After printing the pattern,
8. Press u or d to select the number that you noted in step 7, then press
.
9. Press the l button, then the d button to select any of the menu options
shown below. Make adjustments as needed, and press
setting.
You can also make similar settings using the printer driver software. For
instructions, see page 86 (Mac OS X) or page 113 (Windows).
• CUT METHOD
thinner media, or adjust the speed for thick media. You may need to
experiment to determine the cleanest cut for your paper.
• PAPER FEED ADJUST
value if you see white lines on your prints, or a higher value if you
see dark lines.
• DRYING TIME
smearing the ink. You can make the print head wait up to
10 seconds after each pass to allow ink to dry on the page.
• PAPER SUCTION
printing on thin media (under 12 lb), such as drafting paper or
backlight film.
• M/W ADJUSTMENT
pattern. This improves print quality, but lowers printing speed.
10. When done, press the Pause button.
After you create paper configurations, you can use the
print out a list of paper numbers showing the settings for each one.
Handling Paper and Other Media
THICKNESS NUMBER
lets you decrease the cutting blade pressure for
helps eliminate banding. Choose a lower
lets you print with non-Epson media and avoid
lets you decrease the paper suction level when
adjusts the intensity of the MicroWeave
75
| 75
is highlighted.
to save each
®
menu to
TEST PRINT