Epson Stylus Pro 7880 User Manual page 113

Note: You may need to
change the Color Density
setting if your custom
profile was created to
optimize D-max and color
gamut.
Printing With Epson Drivers for Windows
2. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer's control panel.
• Color Density
when you turn off color management in your printer software).
• Drying Time per Print Head Pass
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry.
• Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
• Paper Suction
printing on thinner papers (less than 12 lb), such as CAD drafting
paper.
• Paper Thickness
sharper image when printing on unusually thick or thin paper.
• Cut Method
and adjusts the speed for thick media. You may need to experiment
to determine the best setting for your paper.
lets you fine-tune the setting for various paper
• Platen Gap
thicknesses.
3. When you finish selecting Paper Configuration settings, click
113
lets you control the ink saturation level (for example,
helps reduce banding. Choose a lower
lets you decrease the paper suction level when
helps reduce vertical banding and creates a
decreases the cutting blade pressure for thinner media,
lets you print with non-Epson
OK
| 113
.