Loading The Paper Onto The Spindle - Epson Stylus Pro 7880 User Manual

Note: The spindle
accommodates both
2-inch and 3-inch roll
paper cores. To switch
between different size
cores, see page 61.
Avoid touching the
printable surface of
the paper as much as
possible. Oils from
your skin can affect
print quality.

Loading the Paper onto the Spindle

1. Slide the black paper stop off the left end of the spindle.
2. Position the roll so the paper unwinds as shown, then slide the spindle
into the roll. Make sure the gray paper stop at the right end of the
spindle is firmly locked into the core and there is no gap between the
paper and the paper stop.
3. Slide the black paper stop back onto the spindle and insert it into the
end of the roll. Make sure it is firmly fixed into the left end of the paper
roll core.
Handling Paper and Other Media
57
| 57