Replacing Ink Cartridges - Epson Stylus Pro 7880 User Manual

Tip: You can store
partially used ink
cartridges for up to
6 months. If you do so,
Epson recommends
covering the openings
with tape.
Maintaining and Transporting the Printer
9. Examine the patterns and determine which number is each set has the
smallest gaps in the lines. Press the u or d button to select the number
for the first set, then press
10. Repeat step 9 for the next set of patterns.
11. If you want to continue aligning the print head, press l, select
, and repeat the steps above to print and check other patterns. If
ALL
additional alignment is necessary, you can repeat this step and select
instead.
UNI-D
12. When you finish aligning the print head, press the Pause button to
exit.

Replacing Ink Cartridges

Before you begin a large print job, you should check your ink levels. If one of
your cartridges is low, you can replace it before you start. Or you can wait
until the ink is expended, replace the cartridge, and then continue the job
without any loss of print quality. However, it is best to replace a low ink
cartridge before starting a large print job.
The easiest way to check ink levels is from the control panel LCD display.
The numbers below the ink icons on the LCD display correspond to the
8 ink cartridge slots on the printer. The icons show the percentage of ink
remaining as follows:
100–81%
80–61%
60–41%
40–21%
When the red B Ink light is flashing and
display, the indicated cartridge is almost expended. Make sure you have a
replacement cartridge. When the light stays on and
is displayed, the cartridge is expended. You must replace the
CARTRIDGE
cartridge before you can continue printing.
You can install any combination of 110 ml and 220 ml cartridges.
141
.
20% or less
Ink low
Ink expended
Cartridge error or no cartridge
appears on the LCD
INK LOW
REPLACE INK
| 141
BI-D