Epson Stylus Pro 7880 User Manual page 88

88 | Printing With Epson Drivers for Macintosh
2. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer's control panel.
• Color Density
• Drying Time per Print Head Pass
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
• Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
• Paper Thickness
sharper image when printing on unusually thick or thin paper.
• Paper Suction
printing on thinner papers (less than 12 lb), such as CAD drafting
paper.
• Cut Method
or adjusts the speed for thick media. You may need to experiment to
determine the best setting for your paper.
lets you fine-tune the setting for various paper
• Platen Gap
thicknesses.
lets you control the ink saturation level.
helps reduce banding. Choose a lower
helps reduce vertical banding and creates a
lets you decrease the paper suction level when
decreases the cutting blade pressure for thinner media,
88
lets you print with non-Epson