Epson Stylus Pro 7880 User Manual page 146

146 | Maintaining and Transporting the Printer
Note: If REPLACE
CONVERSION CRTG
appears, press the
Pause button. Remove
the old conversion
cartridge(s) from the right
ink compartment, and
then insert the new
conversion cartridge(s).
Go to step 4 to start
again.
5. Press the button.
6. Follow the instructions on the LCD display to raise the ink levers.
7. When
REMOVE ALL FOUR INK CARTRIDGES ON THE RIGHT
appears, remove all four ink cartridges from the right ink
SIDE
compartment.
8. When
INSTALL C/M/Y CONVERSION CARTRIDGES
the three conversion cartridges in the slots on the right ink
compartment.
9. When
LOWER THE RIGHT INK LEVER
lower the ink lever on the right ink compartment.
The printer starts draining ink and
the LCD display. Wait until draining is complete.
146
appears, insert
appears on the LCD display,
DRAINING INK XX%
appears on