Omron V320-F Series Connection Manual page 76

9.6.6. Receive Message Settings
The receive message settings are shown below.
Note
For details on receive message settings, refer to 3-4 Communication Message Attributes in
the CX-Protocol Operation Manual (Cat. No. W344).
Receive Message Setting Screen
● Settings for Receive Message "RV_RDCODE"
Settings
(W(1),*)+<t>
(1) (2)
No. Code
(1) (W(1),*)
(2) <t>(Terminator)
* Header <h> is set to None.
Response Format of Receive Message
This is the response format of the receive message from the code reader that the SCU unit
receives according to the RV_RDCODE setting.
ReadCodeValue
Command
Data
Terminator
Message data: Variable
Loads all variable length data and stores them in the
Internal_ReceiveDataStartWord+1
specified by the PMCR instruction operand in the program
(words starting from 5501).
Message data: Constant in hex, Type: Code, Data:
<CR><LF>
Number of
bytes
Variable Variable: ReadCodeValue
length
2 Fixed: <CR><LF> (#0D0A)
Description
<CR><LF>
Remarks
9. Program
and higher words
73